The mo.lock NFC is a contact free digital ignition lock and substitutes mechanical ignition locks or their electrical switching feature respectively.
The associated digital key/transponder unlocks when the mo-lock NFC is approached (switching distance approx. 40 mm) and the ignition is switched on or off - completely contact free.
The mo.lock NFC is based on the latest NFC technology (Near Field Communication) and therefore, unlike e.g. radio remote controls, extremely tamper-proof. Each key/transponder has a unique digital code. Only the right digital code unlocks the mo.lock. Key and mo.lock are absolutely free of mechanical wear.
The mo.lock switches an automotive relay with a possible load of up to 40 A - sufficient power for every on-board system.
The hidden mounting of the small mo.lock, covered by non-metallic parts like e.g. a plastic side panel, permits completely removing the mechanic ignition lock. Clean look and various design possibilities are guaranteed - especially for custom bikes!
The two keys have the size of a key-chain and can be used for switching and learning new keys. A maximum of 125 keys can be learned to each mo.lock NFC. Additional keys can be purchased with us.
The mo-lock NFC has a LED on the front which indicates different status by colour. To protect the battery the standby current in switched-off mode is only 3,2 mA, reduces to 1,5 mA after 16hrs und after 8 days to 0,75 mA.
NOTE: We do not recommend using the mo.lock combined with immobilizers! Please contact your dealer/manufacturer for informations about the possible deactivation of the immobilizer.
Advantages
NFC technology is tamper-resistant
Each key has a unique code
The key first activates the mo.lock without touching it and then, via the relay, the entire on-board system
Neither key nor mo.lock NFC suffer from mechanical wear
The key requires no battery
No overload or scorched pins possible due to indirect switching via the 40 A main relay
The mo.lock NFC is very compact an can be mounted hidden in many places
Water tight and vibration resistant because of the moulded-in construction
Keys can be easily purchased and 'learned' to any mo.lock NFC - your integrated locksmith
A switching distance of 2 - 4 cm ensures convenient switching while excluding the possibility of accidental engagement
An integrated RGB-LED shows the status of the mo.lock while switching, connecting and 'teaching' new keys
Parts delivered
mo.lock NFC
2 keys
1 automotive relay 12V/40A
Detailed installation and operating instructions
ATTENTION: Please order connection cable separately. A complete wire hareness saves assembling time and can be ordered under accessories .
Specifications and features
Transmitter/receiver, diameter of installed assembly
32 mm
Height
12 mm without terminals and bracket
Weight incl. cable
approx. 35 g
Fixture
1 x M3 threaded hole on back side
Operating voltage
8V - 18V
Operating temperature
-20 °C... +80 °C
TC Bros 5/16-18 Threaded 1" Long Steel Bung
Regular price
$29.00
5/16-18 Threaded 1" Long Steel Bung
Steel Bungs 5/16-18 Threaded 1 inch Long by TC Bros Save time and create a super strong mount for just about anything on your bike using these fully threaded bungs. Proudly made in the USA from premium American 1018 cold rolled steel for easy welding. These are a perfect match to our 3/8" counterbore style bungs for socket head bolts. These bungs are 3/4" diameter x 1" long and are tapped through with 5/16-18 threads. See photos for all dimensions. Sold in packs of 4.
TC Bros Rigid Solo and Cobra Seat Mounting Kit
Regular price
$68.95
Rigid Solo and Cobra Seat Mounting Kit
Everything you need to mount your TC Bros. Rigid Solo or Cobra Seat. The weld-on bracket is coped to fit our Sportster hardtail perfectly. Mounts are slotted if you want to use this for a universal/custom use.
Prism Supply Co. Darlington Air Cleaner
Regular price
$329.95
Darlington Air Cleaner
Get rid of your bulky air cleaner and show off that H-D Engine! The Prism Supply Co. Darlington Air Cleaners were designed to achieve a clean, classy, and traditional look while maintaining maximum performance. These are beautifully machined from a solid chunk of 6061 aluminum and are available with either a polished or brushed finish. The internal venturi was designed to allow for maximum airflow. The mounting hardware for the cover is installed from the backside and gives that minimal look we all strive for.
With our combination of heavy and fine filtering elements, we can guarantee you’ll be keeping all that unnecessary crud out of your engine. If you ever are in need of a replacement filter element, those can be purchased here.
This compact kit is designed to be used on all H-D engines that use a CV carburetor or factory EFI units (excluding throttle by wire models)
Dimensions are as follows:
5.5” diameter
1.5” total depth
*Some basic jetting/ tuning may be required upon installation to maintain the correct air/ fuel mixture.
TC Bros M8 Fat Bob Kickback Sissy Bar Black 2018-Newer FXFB FXFBS
Regular price
$270.00
M8 Fat Bob Kickback Sissy Bar Black 2018-Newer FXFB FXFBS
TC Bros. Bolt-on Sissy Bar makes securing your gear fast and simple. Classic good looks and durable one-piece construction will provide years of hassle-free service. Direct bolt-on fitment for Harley Davidson Milwaukee Eight®Softail Fat Bob 2018-newer FXFB FXFBS.
Unique Features
The rigid design is constructed from 5/8" diameter solid steel.
Precision CNC bent for perfect fitment and symmetry.
TIG-welded for strength and appearance.
Durable black powder-coat finish.
Integrated "bungee hook" holes for use when securing your gear.
Stainless steel hardware is included for easy installation.
Fitment Notes:
Direct bolt-on kit to Harley Davidson M8 Fat Bob 2018-newer FXFB FXFBS.
Works great with stock turn signals.
Will fit with or without stock chrome frame covers on most models.
Overall height: 20.5"
TC Bros Sissy Bar/Fender Strut Mounting Bungs 5/8" ID
The good folks over at Prism Supply Co have designed a license plate bracket to work with any new or vintage license plate. It's perfect for that sissy bar application. Comes in either stainless or mild steel with a thickness of 8 gauge or 0.1285".
Our 1" Whiskey Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. All joints are precision fit and hand TIG welded to a finish you will be proud to display. The bends are created on a CNC mandrel bender for high quality and flawless symmetry. The uprights of these bars are internally threaded to accept standard ½-13 tpi mounting bolts. They are designed to fit stock or aftermarket Harley Davidson triple trees with removable risers that are 3.5" center to center spacing. The riserless design of these handlebars allows them to mount directly to the stock ½" diameter holes in the top of the triple tree, making for a very clean install. The 30 degree forward sweep in the uprights makes the bars sit perpendicular to the ground on most Harley models with stock rake front ends. With 6" of rise at the grips, and a 24" overall width, these bars are narrow while providing an aggressive look and feel for your bike. These bars fit stock cables, brake lines, and wiring on most Harley models.
Available in two configurations:"Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls.
Available in two finishes:Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
TC Bros. 1" Rabbit Handlebars - Chrome
Regular price
$230.00
1" Rabbit Handlebars - Chrome
Our 1" Rabbit Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. All joints are precision fit and hand TIG welded to a finish you will be proud to display. The bends are created on a CNC mandrel bender for high quality and flawless symmetry. The uprights of these bars are internally threaded to accept standard ½-13 tpi mounting bolts. They are designed to fit stock or aftermarket Harley Davidson triple trees with removable risers that are 3.5" center to center spacing. The riserless design of these handlebars allows them to mount directly to the stock ½" diameter holes in the top of the triple tree, making for a very clean install. With 10" of pullback and an 18" overall width, these bars are super comfortable and pay tribute to the traditional chopper styling made famous in the 1970’s. These bars are designed for custom chopper applications, but usually fit stock cables and brake lines on most Harley models.
Available in two configurations: "dimpled" to fit 1982-newer OEM Harley hand controls or "Smooth" for custom applications, pre-1982 Harley controls, or aftermarket hand controls.
Available in two finishes: Triple Chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle. Does not fit throttle by wire models.
TC Bros. 1" Lane Splitter™ Handlebars
Regular price
$210.00
1" Lane Splitter Handlebars
Our 1" Lane Splitter Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. The 9.5" rise and 3" pullback result in a comfortable riding position, while the angled uprights give a one of a kind look! These bars fit stock cables, brake lines, and wiring on most Harley models.
Available in two configurations:"Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls.
Available in two finishes:Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
Smooth configuration bars may also be used on many Triumph models or Metric Cruisers with 1" diameter stock handlebars.
TC Bros. 1" Drag Bar Handlebars
Regular price
$130.00
1" Drag Bar Handlebars
Our 1" Drag Handlebars are made from 1 inch OD x 0.109" wall premium steel tubing. They are CNC mandrel bent for ultra-smooth bends and flawless symmetry. They are much heavier duty and higher quality than any imported drag bar you will find. 28" overall width and 2" pullback make for a great looking bar on just about any bike. These bars fit stock cables, brake lines, and wiring on most Harley models.
Available in two configurations:"Smooth" for custom applications or pre-1982 controls, or "Dimple" for 1982-newer Harley controls.
Available in two finishes:Triple chrome plated, or durable satin black powdercoat.
Note: please see photos for dimensions and specifications to confirm fitment of your motorcycle.
Does not fit throttle by wire models.
Smooth configuration bars may also be used on many Triumph models or Metric Cruisers with 1" diameter stock handlebars.
TC Bros 1/4" NPT Steel Weld-In Petcock Bung
Regular price
$23.00
1/4" NPT Steel Weld-In Petcock Bung
TC Bros. 1/4" NPT (National Pipe Thread) bungs are most commonly used for gas tank petcock bungs or for oil tank fittings.
Proudly made in the USA from premium American 1018 cold rolled steel for easy welding.
Note: NPT threads are tapered. They are only designed to be used with corresponding NPT threaded fittings or pipe. The tapered design allows the threads to create a leak proof seal when tightened. They are not to be used with standard bolts or hardware.
These bungs install easily by inserting into a 3/4" diameter hole and welding around the 1" diameter flange. See photos for all dimensions.
Sold in pairs.
Prism Supply Co DIY 1/2" Bar Boss/Bungs
Regular price
$41.95
DIY 1/2" Bar Boss/Bungs
Here is our DIY Sissy Bar Bungs. They are designed to be used with 1/2" bar stock. The mounting hole is for 5/16" diameter hardware. Sold as a pair.
Motogadget mo.blaze tens2
Regular price
$89.00
mo.blaze tens2
The mo.blaze tens2 from motogadget is the smallest rear light/brake light combination in the world.
Its tiny dimensions and the reduced design make it almost disappear on the vehicle.As soon as it lights up, thanks to the IntensiLED® technology, it is extremely bright and definitely cannot be overlooked.
At the same time, the additional side beam angle ensures the best visibility and safety.
The taillight/brake light combination has ECE approval as a rear taillight and brake light.The aluminum housing is CNC milled and available in black anodized or high-gloss polished versions.
The rear light/brake light combination can be operated with 12 V like any conventional LED light.
benefits
extremely small aluminum housing
ECE approval, no registration or similar necessary
increased visibility and safety thanks to an additional side beam angle
maximum luminosity thanks to the latest high-performance LED technology (IntensiLED®)
Electronic voltage conditioning through 330kHz, IC controlled constant current source and safe protection electronics
the fastening thread is standard M8.Therefore no mounting adapter or special heat sink nuts are necessary
scope of delivery
Single rear light/brake light combination mo.blaze tens2 with M8 thread
Nut M8
3 push-lock cable connectors
installation Guide
For use as a pair (only for the rear) please order two mo.blaze tens2.
Specifications and features
Total length with thread
29 mm
Length without attachment thread
11 mm
Largest diameter
11 mm
Cable length
approx. 110 cm
Weight with cable
approx. 20 g
Attachment
M8 threaded bolt
Power consumption
approx. 1/1 watt
Motogadget mo.blaze tens1
Regular price
$89.00
mo.blaze tens1
The mo.blaze tens1 from motogadget is the smallest add-on blinker in the world.
Its tiny dimensions and the reduced design make it almost disappear on the vehicle.As soon as it lights up, thanks to the IntensiLED® Technology, it is extremely bright and definitely cannot be overlooked.
At the same time, the additional side beam angle ensures the best visibility and safety.
The add-on indicator has ECE approval as a front and rear direction indicator.The aluminum housing is CNC milled and available in black anodized or high-gloss polished versions.
The flasher can be operated like any common LED flasher with load resistors or all of our load-independent flasher relays (mo.flash, mo.wave, mo.stop, mo.relay +).
benefits
extremely small aluminum housing
ECE approval, no registration or similar necessary
increased visibility and safety thanks to an additional side beam angle
maximum luminosity thanks to the latest high-performance LED technology (IntensiLED®)
Electronic voltage conditioning through 330kHz clocked, IC-controlled constant current source and safe protection electronics
the fastening thread is standard M8.Therefore no mounting adapter or special heat sink nuts are necessary
scope of delivery
Single add-on blinker mo.blaze tens1 with thread M8
Nut M8
2 push-lock cable connectors
installation Guide
For use as a pair, please order two indicators and four indicators for the front and rear.
Specifications and features
Total length with thread
29 mm
Length without attachment thread
11 mm
Largest diameter
11 mm
Cable length
approx. 110 cm
Weight with cable
approx. 20 g
Attachment
M8 threaded bolt
Power consumption
approx. 1 watt
Motogadget mo.flash
Regular price
$50.00
mo.flash
The mo.flash is by far the most compact load independent flasher relay on the market. Nothing comes close in size and simplicity. The mo.flash flasher unit substitutes all conventional flasher relays.
Attention: If you are looking for a flasher relay with automatic deactivation please refer to our mo.stop series.
Advantages
Ultra-compact and light - in essence just a piece of cable attached to a tiny, candy-sized device
Ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past
The wiring can be placed into the handlebar or frame tubes or into the wiring harness
Almost load independent (min. 1 Watt)
Completely implemented using digital semiconductor technology. microprocessor-controlled No mechanical workings, no spools, no electric contacts
Consistently constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watt turn signal lights
e. g. works with 4 turn signal lights or 2 handlebar end turn signal lights
Immediate loss free and brighter illumination of all turn signal lights
Utterly hassle-free connection using only two cables - just connect in series
Completely watertight and vibration resistant because of the moulded-in construction
Short circuit proof, automatic overload protection, switches power up to 100 W.
No heat generation while operating
Only 5 - 18 V operating voltage required
Also applicable for 6 V turn signal lights
Quality made in Germany' - by motogadget
Notes
The mo.flash substitutes a conventional flasher relay. This flasher relay usually is implemented BEFORE the indicator switch. The most convenient way to mount the mo.flash is to simply search and replace the original relay.
The mo.flash can NOT replace the push-button controls. Please refer to our mo.relay+ if you are looking for a flasher relay for push-buttons.
Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules can NOT be replaced or complemented by the mo.flash.
Specifications and features
Casing L x W x H
18 mm x 13 mm x 9,5 mm
Connector cable length
approx. 2 x 50 mm
Weight
approx. 4 g
TC Bros Coped Steel Bung 3/8 - 16 1inch
Regular price
$25.00
Coped Steel Bung 3/8 - 16 1"
Save time and create a super strong mount for just about anything on your bike using these fully threaded coped bungs. Proudly made in the USA from premium American 1018 cold rolled steel for easy welding. Coped to fit perfectly to 1-1/8" diameter frame tubing but is a very easy fit to both 1" and 1-1/4" diameter as well. These bungs are 3/4" diameter x 1" long from flat face to the edge of cope. They are tapped through with 3/8-16 threads. See photos for all dimensions. Sold in pairs.
TC Bros. Weld On Kick Stand for 1-1/8" Frame Tubing
Regular price
$135.00
Weld-On Kick Stand for 1-1/8" Frame Tubing - Black
Get rid of your ugly stock kickstand and replace it with TC Bros. super clean black kickstand with hidden spring.
Kit includes satin black powder-coated kickstand and weldable steel block coped to fit 1-1/8" tubing on your frame.
*not for use on kick-start models
TC Bros - Steel Bungs 3/8-16 Threaded 1/2 inch Long
Regular price
$29.00
Steel Bungs 3/8-16 Threaded 1/2 inch Long
Save time and create a super strong mount for just about anything on your bike using these fully threaded bungs. Proudly made in the USA from premium American 1018 cold rolled steel for easy welding. These are a perfect match to our 3/8" counterbore style bungs for socket head bolts. These bungs are 3/4" diameter x 1/2" long are are tapped through with 3/8-16 threads. See photos for all dimensions. Sold in packs of 4.
TC Bros Electronics Tank (Fake Oil Tank)
Regular price
$155.00
Electronics Tank (Fake Oil Tank)
TC Bros. Custom Chopper/Bobber Electronics Tank that looks like a round oil tank.
The electronics tank is 4.5" diameter and has removable caps (8" long with both end caps installed) for hiding all of your wiring and ignition components while still having access to them. 5/16-18 Mounts are already welded in for you (3.5" center to center spacing) and mounting bolts are included. Parts are made from 16ga steel and are raw finish. The mounting strap is included for you to bolt or weld on. Can fit many other models and applications. The picture shows items mounted on a hardtailed XS650 (bike not included).
Electronics Tank(fake oil tank) dimensions: 4 1/2" diameter and 8" long with caps installed.
Made in the USA.
TC Bros. - 7/8" Single Cable Motorcycle Throttle - Black
Regular price
$147.00
7/8" Single Cable Motorcycle Throttle (Black)
7/8"" throttles are the perfect solution for eliminating the bulky throttle/switch housings on your vintage Honda or Yamaha motorcycle. The minimalist design features an investment cast aluminum housing with classic good looks. The billet aluminum grip tube is CNC machined with a knurled finish to accept a huge variety of aftermarket rubber grips.
The unique design of these throttles fit many models including:
Honda single throttle cable models such as: CB350, CL350, CB450 & CL450
Also can be used as a universal application with custom cables to allow fitment of many years, makes, and models.
These throttles are available in either a black anodized or hand-polished finish. You are currently viewing the 7/8" Single Cable throttle in black finish.