Fuel and Oil

Leather Cushion Washers with 3/8 inch Hole 10 pack

These leather washers are perfect for protecting your paint and are more durable than rubber. The cushioning & dampening effect that these washers provide is perfect for installing between your frame and mounting tabs found on gas tanks, fenders, oil tanks, or anything else you want to protect from vibration. Also great for use under solo seat springs to prevent squeaking. Dimensions are 1 inch diameter x 3/8 inch hole x 1/8 inch thick. Sold in pack of 10 washers.

Universal Frisco Gas Tank Mounting Kit

 Includes 3/8"-16 Stainless steel button head bolts, 1018 mild steel tophat bungs, leather cushion washers, stainless steel washers.

Fuel Reserve Bottle

• High-quality seamless aluminum construction.
• Durable fuel-resistant O-Ring sealed cap.
• Lacquered interior to prevent corrosion. 
• 30 fl. oz. (887ml)
• Not a cheap water bottle! These are specifically designed to carry extra fuel.
• 10.625" Tall 
• 3.125" Diameter
• Fuel bottle holster is not included. You can find the Thrashin Fuel Bottle Holster in the link provided

Heavy Duty Oil Tank Mounting Kit

Use this kit to mount TC Bros. Oil Tanks to our Sportster Hardtail.

Can also be used for universal applications. Made in USA

Petcock 1/4" NPT

The Prism Supply Co petcocks are guaranteed for life! If you're having an issue with it you can send it back to them and they will rebuild it for no additional cost!

This unique petcock fits direct to either a 1/4" NPT bung on your gas tank. This keeps your gas tank looking very clean. It features a 5/16" diameter hose barb on one end and a fuel filter on the other. We recommend using our 1/4" Fuel Line for a snug, leak-proof fit. Rotating the cylindrical piece with the two grooves is how the fuel is toggled on and off. The fuel line does not rotate while toggling the fuel on/off. No reserve.

Many custom and aftermarket gas tanks use a 1/4 inch NPT or 3/8 NPT petcock. NPT stands for National Pipe Thread and it is a tapered thread that seals as you tighten the petcock into the threaded fitting on your gas tank. Lowbrow Customs makes petcock adapter nuts in both brass and chrome that allow you to adapt your 22mm petcock bung to accept either a 1/4 inch NPT or 3/8 inch NPT petcock.

3L Lockable Jerry Can and Sissy Bar Mount - Black

TJ Brutal Customs has come up with arguably the best fuel solution we've seen yet! Perfect for long road trips or those small tank blues for daily riders rockin' a peanut tank. 

Not only will it mount to frames, but it includes the TJBC proprietary sissy bar mount which allows you to mount your jerry can on the back of any sissy bar.

• Fits most sissy bars made from 1/2" dia bar (round or square) using the adapter ring. 5/8" bars will not need the adapter ring.
• 3L capacity
• Lockable by key (includes 2 keys)
• Available in Brutal Black or Red
• Solid aluminum mount 
• Doubles as an additional tie-down point
• Rubberized plates prevent scratching or wear of your sissy bar

TC Bros 5 inch Round Chopper Oil Tank Flat Ends 

TC Bros. 5" Round Oil Tank With Flat Ends Universal Fit.

100% TIG welded from heavy duty mild steel. Pressure tested to ensure quality, leak free performance. Includes CNC machined, knurled aluminum cap (thread size 1-5/16-12tpi). CNC machined bungs are 1/4" NPT for easy plumbing of oil lines. 

Dimensions: 10"L x 5"OD. 3 quart oil capacity.

Proudly Made in the USA.

See TC Bros. Part #105-0133 for rubber isolated mounting hardware kit.

Wassell Style Peanut Tank (Mid-Tunnel)

Want that timeless "Wassell" styling but don’t want to have to deal with overpaying for a leaky rusty tank at a swap meet? TC Bros. has your solution! The 2 gallon "Wassell" Peanut Bobber Tank.

This tank features a "frisco" style mid tunnel so that the tank sits just right on the backbone of your frame. Un-drilled front and rear universal mounting tabs keep mounting this tank simple. Popular screw-in-style gas cap bung, single 3/8" NPT and dual rear 1/4" NPT petcock bungs give you plenty of options for petcocks and gas caps. You can't go wrong with this classic styled gas tank!

Even though these tanks are pressure tested from the factory. We recommend sealing any custom tank with Kreem Tank Sealer before painting! It is cheap insurance and we use it on every bike that we build. Also, assure the tank is properly isolated so there is no unnecessary stress placed on the tank our mounting hardware when the tank is mounted. We highly recommend using the gas tank mounting kit for proper installation.

This tank does not fit 2004-newer Sportsters as the backbone tube is too large in diameter. 

Mid Tunnel Tank dimensions are as follows; Tunnel Width 2 1/8", Length 15 1/2", Depth 2" in the rear, approx. 4" in the front.

Custom Sporty-Style Gas Tank

• Steel gas tank features tig welded construction
• 20" L x 11" W x 8.5" T
• Tunnel is 3" deep
• Mounting tabs measure approximately 23" center to center
• Tanks for fuel-injected modles accept the OEM fuel pump , components and fuel door
• Tanks for carborated modles accept 22mm petcocks
• All tanks use L96-20 vented fuel caps (sold seperately)
• Approximately 3 gallons of fuel
• Chrome mounting hardware included

Custom Peanut Gas Tank for Honda Shadow VT750 ACE 1998 - 2003

This hand made, custom bobber fuel tank for the Honda Shadow VT750 ACE 1998 - 2003 is the fuel tank of choice for those looking for quality. Perfect for your Honda Shadow Bobber or chopper.

Buy it nice, or buy it twice. This Honda Shadow VT750 ACE Gas Tank is different in every way. 

• Thick Steel: Most other hack job gas tanks that are made for the Honda Shadow VT750 ACE, are made of steel that is too thin to withstand the vibration of this engine size and therefore end up cracking and leaking and destroying your expensive paint job. We know. We have tested them and decided we wanted to make a fuel tank for your Honda Shadow bobber that was far superior.
• No Fabrication Required: We also wanted to make this Honda Shadow gas tank available for those who are not fabrication masters. It is 100% Bolt on, no drilling or fabrication required, but we do recommend using loc-tite on the mounting bolts. 
• Anti-Leak Proprietary Gas Cap: This tank unlike any other features our proprietary anti-leak breathable low profile gas cap.
• Perfect Fitment: The TJ Brutal Customs, Custom Peanut Gas Tank sits perfectly on the backbone of your bike, is made by hand and will last for years to come.

If you are looking for a gas tank for your Honda Shadow VT750 ACE that will fit your bike right, and is built to last, you just found it. 

Tank Dimensions: Approximately  16"L, 9.25"W, 8"D
Capacity: Approx. 2.4 gallons+-

Includes: 

• TJ Brutal Customs Vented aluminum gas cap
• Fuel line
• Barbed fuel fitting
• Mounting hardware
• Tanks are not lined. We recommend using Red-Kote!

**Note:  To prevent spillage from fuel expansion and vibration, do not overfill, fill within about an inch from the filler neck.  We also recommend using T-tape on all plumbing threads. You do need to line these tanks. They will rust eventually and then you will be big time sad when the gas starts to ruin your sexy 1800$ paint job from the inside out. This Honda Shadow VT750 bobber fuel tank WILL NOT fit any other models. If you are unsure about what model you have, please refer to the images for an example of the ACE backbone. This is simply the best Honda Shadow custom bobber fuel tank you can get. 

Guess I have to say this - These tanks are raw steel. If you dont paint them, they will rust. 

1/4" NPT Steel Weld-In Petcock Bung

TC Bros. 1/4" NPT (National Pipe Thread) bungs are most commonly used for gas tank petcock bungs or for oil tank fittings.

Proudly made in the USA from premium American 1018 cold rolled steel for easy welding.

Note: NPT threads are tapered. They are only designed to be used with corresponding NPT threaded fittings or pipe. The tapered design allows the threads to create a leak proof seal when tightened. They are not to be used with standard bolts or hardware.

These bungs install easily by inserting into a 3/4" diameter hole and welding around the 1" diameter flange. See photos for all dimensions.

Sold in pairs.

Wasp Style Fuel Tank

• Wasp-style narrow gas tank for custom applications that have a great vintage look
• Also known as an "Axed" style tank
• Made from precision steel stamping
• 2.2 Gallon
• Has a right side 3/8" NPT and left side 1/4" NPT petcock bung
• Universal brackets make it easy to mount it to any stock or custom frame
• Uses 73'-81' style cam lock caps like this chrome one or this black one
• 17.57" L x 9" W x 9" D
• The tunnel is 2.5" W x 3.5" D
• We always suggest lining any new tank. It is cheap insurance and the Kreem Lining Kit works great
• The Universal Mounting Kit makes installation easy

3L Lockable Jerry Can and Sissy Bar Mount - Red

TJ Brutal Customs has come up with arguably the best fuel solution we've seen yet! Perfect for long road trips or those small tank blues for daily riders rockin' a peanut tank. 

Not only will it mount to frames, but it includes the TJBC proprietary sissy bar mount which allows you to mount your jerry can on the back of any sissy bar.

• Fits most sissy bars made from 1/2" dia bar (round or square) using the adapter ring. 5/8" bars will not need the adapter ring.
• 3L capacity
• Lockable by key (includes 2 keys)
• Available in Brutal Black or Red
• Solid aluminum mount 
• Doubles as an additional tie-down point
• Rubberized plates prevent scratching or wear of your sissy bar

Ucor Tank - Universal Coolant Overflow Reservoir

This UcorTank (Universal Coolant Overflow Reserve Tank) includes a vented cap, O-ring, 2 coolant line fittings, and two clamps to attach to your frame. Includes everything you need to install and it's a downright pretty alternative to the gross plastic reservoir under your bike!

This universal coolant reservoir is handmade from 1.75" OD stainless steel, approx 7.5" long with a 6061A aluminum cap and high-quality brass hose fittings designed to make function totally fashionable. This simple and effective stainless overflow reservoir clamps onto the down tubes of your frame using simple tools to install.

Fits Honda Shadows and MANY other bikes that require coolant overflow tanks! When chopping a bike, most folks don't want an ugly plastic tank hanging out of their bike. This tank allows you to minimize the number of coolant lines running all over your bike and relocate the coolant overflow reservoir easily. 

Installation will take about 10 minutes, not including bathroom breaks!

How To Install
When removing your stock reservoir, take the overflow line and run it from the thermostat to the top fitting of the reservoir, mount your reservoir on the frame, measure 23.4 times and cut the tubing to fit. Next, cut a section of tubing for your return line approximately 5-6 inches long, cut the bottom end at an angle, and the top end straight. Push the return hose onto the inner barbed fitting and fill with coolant and screw the cap on, then push the overflow line onto the top fitting. DONE! 

This will fit most bikes under 1100cc's that require a coolant overflow. 

Original Style Gas Cap 

• Replacement gas caps for OEM and custom tanks
• 36-72 Big Twin, 58-E73 XL 
• Vented
• Will not fit screw-in type tanks
• Chrome

Perfect fit for the Narrow Sporty Tank, Wasp Style Tank and others

Original Style Gas Cap 

• Replacement gas caps for OEM and custom tanks
• 36-72 Big Twin, 58-E73 XL 
• Vented
• Will not fit screw-in type tanks
• Powder Coated Black

Perfect fit for the Narrow Sporty Tank, Wasp Style Tank and others

Wassell Style Peanut Tank (High-Tunnel)

Want that timeless "Wassell" styling but don’t want to have to deal with overpaying for a leaky rusty tank at a swap meet? TC Bros. has your solution! The 2 gallons "Wassell" Peanut Bobber Tank. This tank features a high tunnel so that the tank sits very low on the backbone of your frame. Un-drilled front and rear universal mounting tabs keep mounting this tank simple.

Popular screw-in-style gas cap bung, single 3/8" NPT and dual rear 1/4" NPT petcock bungs give you plenty of options for petcocks and gas caps. You can't go wrong with this classic styled gas tank!

Even though these tanks are pressure tested from the factory. We recommend sealing any custom tank with  Kreem Tank Sealer before painting. It is cheap insurance and we use it on every bike that we build. Also, assure there is no stress on the tank mounting hardware when the tank is mounted.

This tank sits very low on the backbone of your motorcycle frame. Please check measurements to make sure this will fit your bike before purchasing. Does not fit on a Yamaha XS650 (hits top motor mount)

This tank does not fit 2004-newer Sportsters as the backbone tube is too large in diameter.

Tank Dimensions: 17" overall length from tip to tip of mounting tabs, 8-1/2" overall width, 2-1/8" wide tunnel, Rear Tunnel 2" deep, Front Tunnel 6" at the deepest point.

Custom Sporty-Style Diamond Pattern Gas Tank

• Steel gas tank features tig welded construction
• 20" L x 11" W x 8.5" T
• The tunnel is 3" deep
• Mounting tabs measure approximately 23" center to center
• Tanks for fuel-injected models accept the OEM fuel pump, components, and fuel door
• Tanks use L96-20 vented fuel caps (sold separately)
• Approximately 3 gallons of fuel
• Chrome mounting hardware included

Sportster Style Tank

• Low tunnel tank
• 2.4 Gallon
• Mounts easily with front and rear tabs (custom mounting required)
• Sold in two bung configurations. The first has a 3/8" NPT petcock bung on the left side and two 1/4" NPT petcock bungs at rear
• The second configuration has a 3/8" NPT petcock bung on the left side but DOES NOT have the 1/4" NPT bungs
• Uses 1982/later screw in vented gas cap (not included) 
• We always suggest lining a new tank as cheap insurance. The Kreem Lining Kit works great!
• This Universal Mounting Kit makes it easy to install

Heavy Duty Gas Tank Rubber Mounting Kit

The TC Bros. universal fit, weld-on gas tank rubber mounting tabs kit is CNC laser cut from 1/4" thick American made mild steel for easy welding.

The CNC machined, 6061 aluminum tophat style spacers and military spec rubber grommets perform under the most demanding rigid frame applications. Included 5/16"-18 x 1" stainless steel button head mounting bolts look great and are very corrosion resistant.

Commonly used with "Frisco" style fuel tanks, these tabs save you a lot of time on your build while providing you with professional quality results. To install, simply weld the tabs to the backbone of your motorcycle frame, insert the rubber grommets and tophat spacers, then the bolts pass through the tophats and thread into the mounting bungs located on the bottom of your fuel tank (not included).

Aluminum Filler Cap for Oil or Gas Tanks - Vented

TC Bros Aluminum Filler Cap for Oil/Gas Tanks (vented).

Standard 1 5/16" - 12 Thread Fits Many Chopper Oil Tanks such as Mooneyes.

CNC Machined From 6061 Billet Aluminum. 'Knurled' For Extra Grip. Leak Free O-Ring Seal. Dome top contour for classic looks.

Made In USA.